Reduction mill_News Center_nanjing jinxin transmission equipment co. LTD

Our company rolling mill gear box structure features

Our company rolling mill gear box structure features

Abstract:

Gearboxtype:allthegearboxesofhorizontalrollingmillaredividedhorizontally,andthetransmissiongearsofalllevelsarearrangedasfaraspossibleatthedividingsurfaceofthegearbox.Thegearmeshingpartofthereducerhaso

The box structure of reducer of rolling mill

Abstract:

The box body is an important part of the gear box. It bears the reaction force from the transmission of the gear. It must have enough rigidity to bear the force and torque, prevent deformation and ens

Maintenance of reduction gear of rolling mill.

Abstract:

V. if the gear box stops in the production process and the oil is stopped for more than 8 hours before starting, it shall comply with the requirements of "v. start". Especially in winter, if the oil i

Matters needing attention for starting reducer of rolling mill

Abstract:

1.Thefollowinginspectionsshallbecarriedoutbeforestart-up: 1)whethertheinstallationofpressuregauges,electriccontactflowmetersandotherdevicesisfirmandreliable,andwhethertheactualdataiscorrect,shallbeli

Safety precautions for use of reduction gear of rolling mill

Abstract:

1.Beforeuse(installation,operation,maintenance,spotcheck,etc.),theusermustreadthisoperationmanualandotherattachedmaterialscarefullyanduseitcorrectly.Theknowledgeofthemachine,safetymattersandmatterstob

Rolling mill reducer lifting, transportation and installation

Abstract:

If R BBB 0 200mm is needed, the axial runout value can be increased accordingly. 7. Input and output shaft couplings must be installed in accordance with their standards. It is not allowed to force